Breast Milk Jewelry Making Kit
Store the breast milk at room temperature in a clean container.
Press the top of the pipette and place it into the milk. Slowly release the pressure to draw the breast milk inside. It does not need to be completely full.
Pour the milk from the pipette into bottle "A". Use only 1 pipette measurement.
Pour all the solution from bottle "B" into bottle "A".
Mix until the solution becomes a homogeneous white mixture. Approximately 4 minutes.
Pour the milk into the mold immediately after mixing. Leave for 48 hours.
Carefully sand the back of your piece and attach your jewelry to the loop.
Your memory has now been eternalized.
jewelry care guide
Daily care
- Remove before showering, swimming, or any contact with water.
- Avoid contact with perfumes, lotions, sunscreens, or cleaning products.
- Put your jewelry on last, after applying all personal care products.
- Gently wipe with a soft, dry cloth after each use.
Storage
- Store in the pouch or box provided.
- Keep in a cool, dry place away from sunlight and heat.
- Avoid humid environments like bathrooms.
What to avoid
- Do not expose to chlorine, saltwater, or hot water.
- Avoid direct sunlight for long periods.
- Do not use abrasive cleaners.
- Avoid impacts and falls.
Recoating
- Apply a thin layer of clear nail polish base coat if needed.
- Allow to dry completely before wearing.
- Repeat every few months if necessary.
Important: Your Lackto jewelry is a unique handmade piece crafted with real breast milk. With proper care, it will preserve your memory beautifully for many years.